Installation and use of thermostatic shower
Time：
2022-11-03
Author：
Goalar Export Team
* Users with fine solid hard blocks in tap water are not suitable for using thermostatic shower faucets;
* Tap water containing powdery sediment or soft foreign matter may reduce the sensitivity of the thermostatic valve core and may also shorten the service life of the thermostatic shower faucet;
* Try to shorten the distance between the water heater and the faucet so that the hot water can reach the faucet as soon as possible;
* Normal water pressure is 0.05Mpa ~ 0.6 Mpa;
* The hot and cold water supply pipes must not be installed wrongly, the hot water pipes must be on the left, and the cold water pipes must be on the right;
* Be sure to clean up the installation site before installing the thermostatic shower faucet to avoid fine sand and gravel hard blocks damaging the rubber ring, thread, thermostatic valve core and other parts of the faucet;
* Please install according to the instructions in the manual, taking special care not to miss, lose or damage any gaskets or rubber rings;
* The constant temperature shower faucet itself does not have heating function, please adjust the water temperature of the water heater to 60°C ~ 85°C;
* Showers and shower tubes cannot withstand high temperatures above 60°C;
* After each use, be sure to adjust the water temperature adjustment knob on the left to below 40°C;
* If the difference in water pressure between hot water and cold water is too large, please adjust the valve of the bracket with a screwdriver. Households using gas water heaters need to pay more attention to this.
Related Information
Want To Know More?
Please provide your contact information and requirements, and we will reply to you as soon as possible.
Chaozhou Goalar Technology Co., Ltd.
Addr：Opposite Gongzai Mountain, 233 Provincial Road, Hengyang Village, Dengtang Town, Chaozhou, Guangdong, China
